OEMODEL

Description

OEMODEL computes the block adjustment for a CATALYST Professional OrthoEngine project file. It uses the math model computation appropriate to the model specified in the OrthoEngine project file.

Parameters

Name	Type	Length	Value range
InputText: Input OrthoEngine Project File *	Text port	1 - 1
OutputMM: Output math model layers	BIN port	0 - 4096
Report	String	0 - 192	See parameter description

* Required parameter

Parameter descriptions

InputText: Input OrthoEngine Project File

Specifies the name of the OrthoEngine project file. Images in this project file must have math model information. The model computed will be a block adjustment of all images in the project file.

The updated math model is automatically saved to a math model segment of each image in the project. If the image files are not in PCIDSK format, a linked PCIDSK file with the same name is created in the same folder to store the math model segment. This linked PCIDSK file can be used as input data for other functions.

OutputMM: Output math model layers

Specifies the output math model layers in which to receive the computed math model information.

Report

Specifies where to direct the generated report.

Available options are:

• LOG: generates a report on the terminal (default)
• <modulename.RPT>: appends a report to the module's RPT file
• DISK: generates a report on file "IMPRPT.LST"

Details

OEMODEL calculates the mathematical model required for orthorectifying a set of images contained in an OrthoEngine project file. The GCPs and orbit information are taken from the project file. The appropriate math model calculation task is called depending on the math model specified in the project file.