OEBLUNDER

Description

OEBLUNDER automatically detects and removes errors, or blunders in images, and with tie points (TP), and ground control points (GCP) in a CATALYST Professional OrthoEngine project file (*.prj).

Parameters

Name	Type	Length	Value range
InputText: Input OrthoEngine project file *	Text port	1 -
OutputText: Output OrthoEngine project file *	Text port	1 -
Report	String	0 - 192	See parameter description

* Required parameter

Parameter descriptions

InputText: Input OrthoEngine project file

The path and file name of the input OrthoEngine project file.

OutputText: Output OrthoEngine project file

The path and file name of the output OrthoEngine project file.

Report

Specifies where to direct the generated report.

Available options are:

• LOG: generates a report on the terminal (default)
• <modulename.RPT>: appends a report to the module's RPT file
• DISK: generates a report on file "IMPRPT.LST"

Details

OEBLUNDER detects and eliminates blunder points and images in an OrthoEngine project file.

With some supported types of math models, such as airphoto, RPC, and ADS, an additional blunder-removal step is performed after removing the logical blunders. In this step, the root mean square (RMS) error is calculated for the entire project by using the input math model. Any points in the project in which the error value is equal to or greater than the total project error multiplied by five are eliminated.