CDSPOT5

Description

CDSPOT5 reads SPOT5 imagery from a TIFF-format CD when satellite orthorectification is required. CDSPOT5 automatically creates a PCIDSK file, reads all the requested imagery channels from CD, and saves the satellite path information in a segment. The output from CDSPOT5 is used with CATALYST Professional OrthoEngine.

Parameters

Name	Type	Caption	Length	Value range
FILI *	String	Input file name	1 - 192
FILO *	String	Output file name	1 - 192
LINKFILE	String	Create linked file (NO/YES)	0 - 3	YES, NO Default: NO
CDIC *	Integer	CD Input channel(s)	1 - 16
TEX1	String	File description	0 - 144
REPORT	String	Report mode	0 - 192	Quick links
MONITOR	String	Monitor mode	0 - 3	ON, OFF Default: ON

* Required parameter

Parameter descriptions

FILI

Specifies the full path and file name of the input TIFF image file.

FILO

Specifies the name of the PCIDSK file that will receive the processed data. The output file is created automatically and must not already exist.

LINKFILE

Instead of creating a new PCIDSK FILO to read the data from FILI, this parameter will create an output file in which the image channel is linked to the original imagery channel. The orbital segment will still be created in FILO. The default value is NO.

CDIC

Specifies the list of channels or layers to read from the CD. Up to 16 channels may be specified.

For each channel, a corresponding channel is created in the output PCIDSK file. Duplicate channels are not allowed.

If this parameter is not specified, all channels will be read from the file.

Ranges of channels or segments can be specified with negative values. For example, {1,-4,10} is internally expanded to {1,2,3,4,10}. When you are not specifying a range in this way, only 48 numbers can be specified explicitly.

TEX1

Optionally specifies a line of text that describes the file. Typically, this contains information that identifies the location of the data and the CD reference number.

If TEX1 (File Description) is not specified, the File Header fields in the generated output PCIDSK image database hold the following information:

• FH5 receives the tape ID, satellite sensor, and satellite track
• FH7.1 receives the acquisition date and scene center (longitude and latitude, in decimal degrees)
• FH7.2 is empty

REPORT

Specifies where to direct the generated report.

Available options are:

• TERM: generates a report on the terminal (default)
• DISK: generates a report on file "IMPRPT.LST"
• OFF: turns off report generation
• <filename>: appends a report to the specified file

MONITOR

The program progress can be monitored by printing the percentage of processing completed. A system parameter, MONITOR, controls this activity.

Available options are:

• ON: Turns the monitor ON (default)
• OFF: Turns the monitor OFF (recommended if running in batch or background mode)

Details

CDSPOT5 is part of the satellite orthorectification component. It reads a SPOT5 TIFF file from a DIMAP-format CD when satellite orthorectification is required. The corresponding metadata file must also exist in the same directory. CDSPOT5 automatically creates a PCIDSK file, reads all the requested imagery channels from CD, and saves the satellite path information in a segment. Output from CDSPOT5 is used with CATALYST Professional OrthoEngine.

CDSPOT5 extracts from the CD the geographic coordinates of the scene center and the four corner points. The values are stored in the output orbit segment. These points can be used as ground control point (GCP) input for an approximate correction, which is useful when GCPs are unavailable for an area. Note, however, that using geographic coordinates may not produce very accurate results.

If the LINKFILE parameter is set to NO, the output file is automatically created with the dimensions required to hold all of the requested data. Ensure that sufficient disk space is available before running CDSPOT5. If LINKFILE is set to YES, the image channel is not created; instead, it is linked to the image channel of FILI. For stereo data, LINKFILE is ignored and a new file is created because rotation is required when reading the data.

Example

For a GeoTIFF-format CD in the SPOT5 1A product, perform an orthorectification on the data. Extract channel 1 and store the data in the file 'spot5.pix'.

EASI>FILI="IMAGERY.TIF"
EASI>FILO="spot5.pix"        ! Ouput file name
EASI>LINKFILE="NO"
EASI>CDIC=1          ! Input channel number
EASI>TEX1="Richmond Hill, Canada"
EASI>REPORT="spot5.txt"
EASI>MONITOR="ON"

EASI>R CDSPOT5

References

Toutin, Th. "Analyse mathématique des possibilités cartographiques du système SPOT". Thèse de Docteur-Ingénieur en Sciences Géodésiques, ENSG, Paris, France, 1985. pp1 -163.

Toutin, Th. and Carbonneau Y. "La multi-stéréoscopie pour les corrections d'images SPOT-HRV", Canadian Journal of Remote Sensing, Vol. 15, No. 2 (September 1989) p110. (Also available in English from the Canada Centre for Remote Sensing.)