PeruSAT-1

Long name	PeruSAT-1
Short name	PER1
Sensor type	Pushbroom imager. Optics: Korsch telescope in SiC (Silicon Carbide) with an aperture diameter of 640 millimeters.
Platform	PeruSAT-1
Key file name (use to open data set)	dim_per1_*.xml
Supported file extensions	.xml, .tif, and .jpg
Sections	Data product name and description Distribution disk files Returned data for supported format References

Data product name and description

PeruSat-1 is a high-resolution Earth-observation satellite system that was launched into Sun-synchronous orbit in September 2016. The spacecraft monitors the surface of the Earth and captures high-resolution imagery.

Note: The information provided herein is based on the data distributor's documentation cited under References.

Spectral bands: Spectral range (nm)	Spatial resolution (m)* (spectral resolution)	Maximum image dimensions (Across track x along track, km)	Notes
B1 (Blue): 450 - 520 B2 (Green): 530 - 590 B3 (Red): 630 - 700 B4 (NIR): 752 - 885 PAN (Panchromatic): 450 - 750	PAN: 0.7 (12-bit) MS: 2.8 (12-bit)	Ranges from 10 to 60 kilometers at nadir depending on ground sample distance (GSD) and number of detectors. PeruSAT-1: 17 kilometers	N/A

* Resolution is always nadir position unless noted otherwise.

PeruSAT-1 image data is available in two processing levels:

Level 2A
Level 3

Each product is provided as a bundle (pan + four multispectral) or as pansharpened (four pansharpened bands).

Processing level	Horizontal accuracy (m)	Description/notes
2A		Restored sensor product. In the filename, SEN is the identifier. The value in DIMAP is SENSOR.
3		Ortho product. In the filename, ORT is the identifier. The value in DIMAP is ORTHO. Distributed as separate panchromatic and multispectral data sets, or as a pansharpened project.

Processing level

Horizontal accuracy (m)

Description/notes

2A

Restored sensor product.

In the filename, SEN is the identifier. The value in DIMAP is SENSOR.

3

Ortho product.

In the filename, ORT is the identifier. The value in DIMAP is ORTHO.

Distributed as separate panchromatic and multispectral data sets, or as a pansharpened project.

Distribution disk files

A PeruSAT-1 data set is organized in a specific folder structure on disk. GDB uses this folder structure and the file names to identify the data product type.

Warning: Data sets for this sensor are organized in a specific folder structure on disk. GDB uses this structure and the file names to identify the data product type. Do not alter the folder structure or any file names prior to data ingestion to ensure the image data and auxiliary information are imported correctly.

You can open a PeruSAT-1 data set by selecting the dim_per1_*.xml file in the IMG_PER1_* folder.

When opening a PeruSAT-1 data set, the files read by GDB are as described in the following table.

File name	Format	Required	Contents/details
dim_per1_*.xml	DIMAP	Yes	Key file name. Contains metadata that applies to the data set.
img_per1_*.tif	GeoTIFF	Yes	Image data.
rpc_per1_*.xml	RPC data	Yes	Rational function model.
preview_per1_*.jpg	Joint Photographic Experts Group (JPEG) file	Yes	Image thumbnail file.

Naming convention of image product-level metadata file

The <IMG_DirImage_ID> folder contains the following files:

icon_<product_ID>.jpg
img_<product_ID>.tif
img_<product_ID>.tfw
preview_<product_ID>.jpg
preview_<product_ID>.kmz
rpc_<product_ID>.xml

DirImage_ID is defined as follows:

<MISSION><MISSION_INDEX>_<PROCESSING_LVL>_<SPECTRAL_PROCESSING> _<FIRST_LINE_ALBUM> (Restored Sensor and Ortho products)
Example: per1_ort_pms_000856
—or—
<MISSION><MISSION_INDEX>_<PROCESSING_LVL>_<SPECTRAL_PROCESSING>_ <FIRST_LINE_ALBUM>_<NUM_RETINA> (Level 0 or Level 1 products, which contain as many images as the number of retinas in the instrument).
Example: per1_ l1_pms_000856_a

Product_ID is defined as follows:

<MISSION><MISSION_INDEX>_<IMAGING_D><IMAGING_T>_<PROCESSING_LVL>_ < SPECTRAL_PROCESSING>_<FIRST_LINE_ALBUM>
Example: per1_201002191022416_ort_pms_000856

Returned data for supported format

PeruSAT-1 data can be opened directly in its raw vendor format or imported into a PCIDSK (*.pix) file using the key file name (*_aux.xml). For optimal processing, use the PCIDSK format.

The data structure, after it is opened by GDB, is as described in the following table.

Data product	Data returned	Details/notes
2A (Multispectral)	4 x [16U] raster channels 1 x [ORB] orbit segment 1 x [BIN] Rational function model 1 x [TEX] Main product annotation	N/A
2A (Panchromatic)	1 x [16U] raster channel 1 x [ORB] orbit segment 1 x [BIN] Rational function model 1 x [TEX] Main product annotation	N/A
3 (Multispectral)	4 x [16U] raster channels 1 x [TEX] Main product annotation	N/A
3 (Panchromatic)	1 x [16U] raster channel 1 x [TEX] Main product annotation	N/A
3 (Pansharpened)	4 x [16U] raster channels 1 x [TEX] Main product annotation	N/A

References

PeruSAT-1 DIMAP V2 Product Description. Airbus Defence & Space, CONIDA Agencia Espacial del Peru. V1.0, 2017-01-25. 32 pages.

CARACTERISTICAS DEL SATELITE PERUANO PERUSAT-1. CONIDA Agencia Espacial del Peru V1.0, 1 page.

For more information, go to the CONIDA website: conida.gob.pe.